Marmoleum Residential Floor Finish - 1 Quart
Description / Marmoleum Residential Floor Finish - 1 Quart
DIRECTIONS: Sweep up all loose dirt and dust. Use Forbo’s Neutral pH Cleaner to clean the floor, following the label directions. The floor should be rinsed with clean cool water and allowed to dry thoroughly. Working in small areas, apply a small amount of finish onto the floor. Spread a thin coat evenly with a damp clean mop, damp sponge, or damp applicator across the floor. Repeat the process until the entire area has been covered. Allow 10-15 minutes for the floor to dry. Repeat this process until desired gloss level is reached. To remove the finish, sweep up all loose dirt and dust. Dilute 1 part of Forbo Neutral pH Cleaner with 4 parts of warm water. Use a sponge mop and spread the solution liberally over a 3’ x 3’ area. Be careful not to flood the floor. Scrub the floor with a nylon pad.
Approximate amount per use: 1-2 coats
Approximate spread rate: 450 - 550 sq ft
Download Marmoleum Residential Floor Finish Technical Data
Download Marmoleum Residential Floor Finish Safety Sheet
More Information
| Supplier | Forbo |
|---|